Information about Brine:
Oil based completion fluidsare active, but also controversial, and the water-based fluids need to be disposed of after one use. Brine Fluidsare proved to be the real alternatives. There are so many benefits in using brine-based drilling fluids which are not only environment-friendly, but also offer excellent rates in forming the rock formations.
Reward of Clear Brines:
While water-based muds, cause the clay swelling, brine based fluid reduces the chances of this. Brine is expensive than water-basedmuds but is also more efficient. Brines have been in the rangefor the past 1 to 2 years. There are multiple of them used for the horizontal drilling.
There are also Different Completion Fluids India that you can use for your brine system. It is a dissolved solution of salts, most commonly in water. It can work beyond water too, depending on the densities.
The main advantages of clear brine fluids are it increases rates of penetration and also increases the run life. All this is entirely based on how you manage the temperature level, the capacity of the thermal, and its connectivity. When executed correctly, brine is a reliable free system that achieves the density that you require. Brine fluids are less damaging to the environment and do not damage drilling equipment either.
Some of the formatsbrines have the properties that make them completion fluids and first drilling. All these can stabilize shale, protect the polymer at the high temperature, have an excellent lubricity, are readily biodegradable, and are non-toxic. Brine fluid also reduces costs.
When looking at the actual fluid costs, a cube of format is 360 percent more expensive as compared to oil emulsion mud. For example, if diluted 1575 kg of formate, it would be less expensive. By using the formate, total drill cost was reduced by 11 percent although the wells were less than 2000 meters. For the wells that are longer than 2000 meters, the costs decreased by 27 percent per lateral meter that is drilled for the entire well.
Use Formate Brine :
The ability of the completion fluids India can be very tactile when the temperature drops, and it causes salt precipitation. The increase in the temperature reduces the density of brine and left under saturated to salt. There are two types of brine: Halide brines and formates brine. You can easily adjust the composition of Halide brines to raise the pH level so that it is less corrosive, or you can also use formate brine that is anti-corrosive.
Clear brine fluids are more lubricant than the water based mudsand also work as the alternative to oil-based muds, especially when you are working with the horizontal laterals. The results even got positive when tested with four other brines that is distilled water, calcium bromide, calcium chloride, and potassium formate. Not all brines are suitable for bright drilling fluids. The economic advantages provided by the drilling with the brine formate indicate its potential to dominate the oil based drilling fluids.